Getting Help; Unable To Reboot After Configuration Changes; Bios Menu Bar; Table 5-1: Bios Navigation Keys - IBM 3301690 User Manual

F2 /F3 key Change color from total 16 colors. F2 to select color
forward.
F10 key Save all the CMOS changes, only for Main Menu

Table 5-1: BIOS Navigation Keys

5.1.3 Getting Help

When you press F1 a small help window describing the appropriate keys to use and the
possible selections for the highlighted item appears. To exit the Help Window press E
the F1 key again.

5.1.4 Unable to Reboot After Configuration Changes

If you are unable to boot your computer after you have made changes to the system
configuration, you must restore the CMOS defaults. Use the jumper described in Chapter
Chapter 3, Section 3.4.1.

5.1.5 BIOS Menu Bar

The menu bar on top of the BIOS screen has the following main items:
Main
Changes the basic system configuration.
„
Advanced
„
PCIPnP
Changes the advanced PCI/PnP Settings
„
Boot
Changes the system boot configuration.
„
Security
„
Chipset
Changes the chipset settings.
„
Power Key
„
Exit
Selects exit options and loads default settings
„
The following sections will completely describe the configuration options found in the menu
items at the top of the BIOS screen and listed above.
Changes the advanced system settings.
Sets User and Supervisor Passwords.
Changes power management settings.
3301690 CPU Card
or
SC
77