IBM 6736-HB0 User Manual page 25

i
For image problems, you
I
may want to run MAGE
S
ETUP again before
consulting to this section. In
I
most cases, MAGE SETUP
can fix the problems. See
Autometic Image Setup for
the computer on page 12 for
details.
Possible
Problem
Cause
Screen is blank
Display mode of
and power the computer is
indicator is outside the
flashing green
range of the
every 0.5 monitor
second
CHECK The monitor is
SIGNAL CABLE not receiving a
message is video signal
shown and
power indicator
is steady amber.
Image appears
There are noises
to be smeared
in the video
signal
Image appears
The color setting
to be discolored
may be incorrect.
A small number of missing, discolored, or lighted dots may be
A few dots are
present on the screen, which is an intrinsic characteristic of the
missing,
discolored, or TFT LCD technology and is not an LCD defect.
inappropriately
lighted.
Suggested Action
• Reconfigure key on the
computer to use a supported
display mode.
• Check that the signal cable
is firmly connected to the
computer.
• Check that no pins are bent
in the signal cable connector.
• Select IMAGE SETUP menu
in the OSD. Then select
MANUAL to adjust CLOCK /
PHASE settings.
• Adjust the Color settings.
Reference
Further
Information
section on
page 20.
Connecting
your monitor
section on
page 7.
User
Controls
section on
page 18.
User
Controls
section on
page 18.
23