Thermistor (Condenser/Evaporator) (Liquid Pipe) - Mitsubishi Electric PEY Series Service Manual

DISASSEMBLY PROCEDURE

10-4. Thermistor (Condenser/evaporator) (Liquid pipe)

1. Remove the drain pan according to the procedure in
section 10-3. Drainpan (page44).
2. Removing the Heat exchanger cover
(1) Remove the four fixing screws on the heat
exchanger cover (F) to remove it.
3. Removing the thermistor
(1) Remove the thermistor (G) from the thermistor
holder (H) on the copper tube.
Thermistor size
Liquid pipe: ø8mm
Condenser/evaporator: ø6mm
HWE1305A
Exercise caution when removing heavy parts.
(F)
Fig. 6
(G),(H)
Fig. 7
45