[ IX Disassembly Procedure ]
5. Thermistor (Gas pipe) (Liquid pipe)
Exercise caution when removing heavy parts.
1. Remove the drain pan according to the procedure in sec-
tion 4.
2. Removing the Heat exchanger cover
(1) Remove the three fixing screws on the heat exchanger
cover (H) to remove it.
Tighten screws to a torque of 1.4 0.2 N·m.
3. Removing the thermistor
(1) Remove the thermistor (J) from the thermistor holder (K)
on the copper tube.
Thermistor size
Liquid pipe: ø8mm
Gas pipe: ø6mm
HWE20150
Fig.7
(J), (K)
Fig.8
- 38 -
HEX
(H)
GB