Table of Contents
Advertisement
„ Preparation
„
(1) Connect the AC adaptor.
NOTE: The AC adaptor (AD-E95100L) is sold separately and does not come with the product. If
you do not have the AC adaptor, use six AA-size dry batteries with enough capacity.
(2) Adjust the main volume so that it is at about 1/3 of the full volume.
„ How to Start the Diagnostic Program
„
(1) Hold down the "0" and "START/STOP" buttons at the same time, to turn the power ON.
NOTE: Set the mode switch to the "NORMAL".
NOTE: Be sure to turn OFF the power when the test is finished.
(2) Release the "0" and "START/STOP" buttons.
After the diagnostic program is launched, the test menu screen appears.
DIAGNOSTIC PROGRAM
– 16 –
LK-127
Advertisement
Table of Contents
