Setting Up The Monitor; Connecting The Stand - Dell G3223Q User Manual

Setting up the monitor

Connecting the stand

NOTE: The stand assembly is not pre-installed when the monitor is
shipped from the factory.
NOTE: The following instructions are applicable only for the stand that
was shipped with your monitor. If you are connecting a stand that you
purchased from any other source, follow the set up instructions that were
included with the stand.
To attach the monitor stand:
1. Align and place the stand riser on the stand base.
2. Open the screw handle at the bottom of the stand base and turn it clockwise to
secure the stand assembly.
3. Close the screw handle.
Setting up the monitor | 27