Adjusting The Height Of The Machine - Canon DADF-G1 Service Manual

1.3 Adjusting the Height of the Machine

1) Remove the host copier's rear side
plate. Loosen the lock nut [1], and turn
the height adjusting screw [2] so that
the rear rubber feet (left, right) are 0.2
±0.1 mm from the side size plate of the
copyboard glass when the machine is
closed.
2) After adjustment, check to make sure
that the front rubber feet (left, right) are
firmly in contact with the copyboard
glass.
COPYRIGHT© 2000 CANON INC. CANON DADF-G1 REV.0 OCT. 2000
CHAPTER 3 MECHANICAL SYSTEMS
F03-103-01
[1]
[2]
3-9