Canon DADF-G1 Service Manual page 29

CHAPTER 2 OPERATIONS AND TIMING
The host copier uses the results of detection made by the machine (i.e., lengths in vertical
and horizontal directions) to identify the size of a specific original in terms of a default size.
An original may be identified as being one of the following default sizes:
d. A-Configured DADF, A/B-Configured DADF
Default size
B5R
A5
A4R
FOOLSCAP
B5
B4
COMPUTER paper
A4
A3
Each default size allows a margin of ±10 mm in vertical direction and ±5 mm in horizon-
tal direction; a size falling outside will be identified as being a non-default size.
e. Inch-Configured DADF
Default size
STMT
LTRR
FOOLSCAP
LGL
LTR
COMPUTER paper 381 mm
279 mm × 432 mm (11" × 17")
Each default size allows a margin of ±10 mm in vertical direction and ±5 mm in horizon-
tal direction; a size falling outside will be identified as being a non-default size.
2-12
Vertical length
257 mm
148.5 mm
330 mm
330 mm
182 mm
364 mm
381 mm
210 mm
420 mm
T02-203-01
Vertical length
140 mm
279 mm
330 mm
356 mm
216 mm
T02-203-02
COPYRIGHT© 2000 CANON INC.
Original width
177 to 187 mm
205 to 215 mm
205 to 215 mm
205 to 215 mm
252 to 262 mm
252 to 262 mm
274 to 284 mm
292 to 302 mm
292 to 302 mm
Original width
211 to 221 mm
211 to 221 mm
211 to 221 mm
211 to 221 mm
274 to 284 mm
274 to 284 mm
432 mm
CANON DADF-G1 REV.0 OCT. 2000