HOGERT HT5K565 Instruction Manual page 3

INSTRUCTION MANUAL
PROTECTIVE SHOES
MODEL:
HT5K565, HT5K571, HT5K568
EN
These shoes meet the requirements of Regulation of the European Parliament and the Council No. 2016/425
of 9th March 2016, concerning Personal Protection Equipment and repealing Council Directive No. 89/686/EWG,
and satisfies the requirements of the following standard: EN ISO 20345:2011 for safety shoes.
Application
The protective shoes have been designed and manufactured to minimise the risk of bodily injuries during use. However,
please remember that personal protection equipment does not ensure complete protection, if work is carried out in an
unsuitable environment and working conditions violate the standards set forth in EN ISO 20345:2011. Both synthetic and
natural materials were used during manufacture, in accordance with the quality and usage requirements specified therein.
When selecting protective shoes, take into account the conditions at the particular working station where the shoes will be
used. Pay attention to the protection parameters of the shoes specified for the selected model.
Storage and Maintenance
To ensure the durability of the shoes during their entire life, keep them clean and maintain them regularly. Use a soft cloth
to clean any external dirt or dust. Use detergents dedicated to the particular type of surface material. Do not use any
solvents. If wet, dry the shoes at room temperature, in a well ventilated area and away from any direct heat sources.
Description of the symbols referring to the additional level of protection:
P— Penetration resistance
A — Antistatic shoes
HI— Heat insulation (up to max. 150 °C for 30 min.)
CI— Cold insulation (up to max. -17 °C for 30 min.)
E— Energy absorption capacity in the heel area
HRO— Behavior to contact warmth (max. 300 °C for 1 min.)
WRU— Water penetration and absorption of the upper part of the shoe
SRC— Non-slip on ceramic tiles/cleaning agents and steel plates/glycerine
SRA— Non-slip on ceramic tiles/cleaning agents
Categories of protective shoes:
SB — Shoes meeting the basic requirements [including, inter alia, toe protection]
S1 — Shoes meeting the basic requirements + Enclosed heel area + Antielectrostatic properties + Energy
absorption in the heel area + Resistance to diesel oil
S2 — Same as S1 + Water permeability + Water absorption
S3 — Same as S2 + Resistance to puncture at 1100 N
S5 — all-polymeric footwear + Same as S3
Do not use if damaged, because the shoes do not provide the correct level of protection. It is recommended to change the
shoes for a new pair, to ensure the maximum level of protection. Transport the shoes in the original packaging received
after purchase. If kept in an external packaging, the shoes are protected against mechanical deformations. Do not place
any heavy objects on the packaging, as it could indent the packaging and damage the shoes. Follow these instructions,
when using, maintaining, and storing the shoes.
Certifying Body - Intertek, Centre Court, Meridian Business Park, Leicester, LE19 1WD, UK. Certifying Body No.: 0362.
26.02.2020 r.
Högert Technik GmbH
Pariser Platz 6a, 10117 Berlin, Germany
Manufacturer's Address:
GTV Poland Sp. z o.o. Sp. k., ul. Przejazdowa 21
05-800 Pruszków, Poland
EN ISO 20345:2011