ADT DSC 9047 Quick Manual

DSC 9047 Quick Guide
« Help Center
DSC 9047 - Quick Guide
For a detailed review of the entire system, please view the
Arm & Battery
Disarm the
System

Arm and Disarm

Arm:
To arm all sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY]
key for two seconds or enter your [security code] and exit before the exit delay expires.
To arm all sensors in STAY mode without interior sensors armed, press and hold the [STAY] key for
two seconds or enter your [security code] and do not leave the premises.
Disarm:
To disarm, enter your [security code] before the entry delay expires.
https://alpha.adt.com/help/144[11/12/2018 10:33:41 PM]
Bypass Date &
Protected Time
Areas Settings
Select
Chimes & Reset
Beeps
DSC 9047 manual.
Security Trouble
Codes Conditions
Volume