Table of Contents
Advertisement
ProTimer
PRO TIMER
Battery Installation
The ProTimer operates using a 9 volt battery for power. It is
important to use Alkaline or Lithium batteries (not carbon) due
to the power demand of the buzzer and display backlighting.
Install the battery in the compartment on the rear of the unit.
Once installed, the ProTimer will briefly display a sign-on
message, followed by the home screen.
Note:
If at any time you suspect the unit is not functioning
properly, try resetting it (see page # 14).
Power ON/OFF
To turn the unit ON, press the
SET DECR/ON
button.
After 10 minutes of inactivity, the ProTimer will turn off
automatically.
You may also turn it
OFF
by pressing the
MENU REV/OFF
button for approximately 3 seconds.
Advertisement
Table of Contents
Need help?
Do you have a question about the Pro Timer CEI 4730 and is the answer not in the manual?
Questions and answers