Competition Electronics Pro Timer CEI 4730 Operating Manual page 11

Par time
The par time settings create multiple beeps based on time intervals from the start
beep. The ProTimer has the capacity for up to 5 par times which will automatically
occur at the user settable time interval for each. The default settings are zero for
all 5 par time settings, which effectively turns them off, so in this case there will
be only the start beep at the beginning of an event.
Setting the first par time to a value other than zero will give you a beep at the
start, and another at the end of the par time period. Setting of par times 2 through
5 will string the beeps together in order. When a value of zero is set in any of the
par time locations, it will halt any subsequent values from being active.
Par time is adjustable from 0 to 199.9 seconds.
Start Delay Type
The start delay can be configured for instant, fixed, or a random value based on a
minimum/maximum time frame from the start beep.
INSTANT- The default setting of INSTANT will start a new shot string immediately
upon pressing the start button.
RANDOM- Changing the setting to RANDOM will enable the minimum and
maximum values to appear on the screen. The settable range is from .10 seconds
to 9.90 seconds.
FIXED- If the RANDOM values are both set for the same amount of time, the delay
will be FIXED at that value.
PRO TIMER
8