FujiFilm Revoria Press E1136 Reference Manual page 67

Staple Cartridge for Side Stitch
1. Confirm that the machine is not operating, and open the Cover.
2. Pull out [R1].
Note
After removing the Staple Cartridge, check to make sure that there
is no staple inside of the Finisher.
3. Open the cover of the unit and remove the jammed
staples.
4. Insert the unit into the original position.
5. Close the cover.
Staple Cartridges for Saddle Stitch
1. Confirm that the machine is not operating, and open the Cover.
2. Pull out Booklet Maker [3].
3. Hold the handle of the Staple Cartridge (R2)(R3)
and pull it out.
67
Finisher D