Table of Contents
Advertisement
22. The system will prompt to select the area and CCN ele-
ment screens to clone. Select the area "Local Chiller" and
element that was just added in Network Manager. Then
press "OK" (Fig. 22).
Fig. 22 — Select Element Definition
23. A confirmation screen will be displayed of the clone to be
24. The cloning tool will now search for all linked workspac-
25. Select the same local chiller ("Local Chillers - My chill-
26. Select element names for all 8 workspaces.
27. After entering the information press "Proceed" (Fig. 24).
28. A confirmation will be received for each workspace that
Fig. 24 — Multiple Clone Screen
8
made. Press the "Close" button" (Fig. 23).
Fig. 23 — Confirmation Prompt
es and viewspaces. A pop up screen with the names of the
first 8 linked workspaces found will be displayed. The
workspace names can be customized here and the area
and element to be cloned can be selected.
er") and your chiller (for this example, "My 19XR") for
all 8 workspaces.
is cloned; press "Close" for each one.
a19-1915
Advertisement
Table of Contents
