Table of Contents
Advertisement
Start Carrier Network Manager
1. Minimize the expandable keyboard.
2. Select (tap) the Windows Start icon in the lower left cor-
ner of the screen.
3. Select "All Programs."
4. Select "ComfortVIEW."
5. Select "Carrier Network Manager" (Fig. 8).
Fig. 8 — Start Carrier Network Manager
Configure ComfortVIEW™ Software on Touch
For ease of use, a default CCN database called
Screen —
"Local Chillers" was created and set up for communications
through COM 1 port of the display. An example of the display
showing the default CCN databases and the Local Chiller data-
base is shown in Fig. 9.
Fig. 9 — Default and Local Chillers Database
The other CCN databases listed in Fig. 9 are provided as
templates of chiller versions. Each CCN database contains one
chiller database in Network Manager and associated workspac-
es in Workspace Manager. These files are provided to allow the
cloning of these workspaces for your specific chiller.
More CCN databases are planned for release to support older
software versions and future software releases.
If at any time, Carrier Network Manager issues the operator
message, "Your Access Level will not allow you to perform
this function" or if there is a problem during the configuration
procedure, it may be necessary to log out of ComfortVIEW
and log in again.
To login, use the local administrative account and password.
The username is "sa" and the password is "carrier", both in
lowercase (Fig. 10). The username and password are entered
using the expandable keyboard. The keyboard can be displayed
by tapping the small keypad icon.
a19-1899
It will be necessary to upload your specific chiller into the
Local Chiller CCN database to be able to communicate with
your chiller.
1. Double tap on "Local Chillers."
2. Double tap on ""Local Chillers - My chiller."
3. Carrier Network Manager is started with "Local Chillers -
a19-1900
Fig. 11 — "Local Chillers - My chiller" Screen
4. Select the "
5. "CCN Element Definition" screen is displayed. Enter
NOTE: Default numbers are 0 for Bus and 1 for Element.
5
Fig. 10 — Login Prompt
My chiller" is displayed, as shown in Fig. 11.
+
" icon at the top of the "Local Chillers - My
chiller" screen.
"Element name" (for this example we are using "My
19XR") and "Element description" using onscreen key-
board, then press "OK" (Fig. 12). Enter "Bus" and "Ele-
ment" numbers.
a19-1901
a19-1902
Advertisement
Table of Contents
