Carrier EVERGREEN 19XR Installation And Start-Up Instructions Manual page 7

16. Select the appropriate chiller type and version and press
"OK."
Fig. 16 — Open Workspace
17. After the default workspace of the chiller version to be
cloned is opened, select the "Run" tab at the top of the
screen, then "Enter design mode" (Fig. 17).
Fig. 17 — Select Design Mode
18. The prompt "Reload current WorkSPACE for design?"
will be received. Press the "Yes" button. (Fig. 18).
Fig. 18 — Reload Prompt
19. From chiller display page, select "File" tab at the top of
a19-1907
Fig. 19 — Select "Save Current WorkSPACE as"
20. The "Save Current WorkSPACE As" prompt box is dis-
a19-1908
21. The "Clone WorkSPACE" prompt is received. Enter the
a19-1909
7
the screen, then select "Save Current WorkSPACE as"
(Fig. 19).
played. Input the filename of your local chiller default
screen. Then press the "Clone" button (Fig. 20).
Fig. 20 — Save Workspace Name
new workspace name of the default workspace for your
local chiller. Enter using the onscreen expandable key-
board. Then press "OK" (Fig. 21).
Fig. 21 — Enter New Workspace Name
a19-1914