Table of Contents
Advertisement
Quick Links
HEAVY DUTY
FLOOR JACK
Model:
RFJ-6HD
SHIPPING DAMAGE CLAIMS
When this equipment is shipped, title passes
to the purchaser upon receipt from the carrier.
Consequently, claims for the material damaged in
shipment must be made by the purchaser against
the transportation company at the time shipment
is received.
Operation MANUAL / PARTS LIST
Forward this manual to all operators.
Failure to operate this equipment as
directed may cause injury or death.
BE SAFE
This tool was designed and built with safety in mind.
However, your overall safety can be increased by
proper training and thoughtful operation on the part
of the operator. DO NOT operate or repair this tool
without
reading this manual and the important
safety instructions shown inside. Keep this operation
manual near the tool at all times. Make sure that ALL
USERS read this manual .
Santa Paula, CA. 93060, USA
1645 Lemonwood Dr.
Toll Free: 1-800-253-2363
Tel: 1-805-933-9970
Fax: 1-805-933-9160
www.rangerproducts.com
Advertisement
Table of Contents
Related Manuals for Ranger Products RFJ-6HD
Summary of Contents for Ranger Products RFJ-6HD
- Page 1 OPERATION MANUAL / PARTS LIST HEAVY DUTY FLOOR JACK Model: RFJ-6HD BE SAFE SHIPPING DAMAGE CLAIMS This tool was designed and built with safety in mind. When this equipment is shipped, title passes However, your overall safety can be increased by to the purchaser upon receipt from the carrier.
- Page 2 WARNING! THIS OPERATING MANUAL CONTAINS IMPORTANT DETAILS CONCERNING THE SAFE OPERATION OF THIS TOOL THE ALTERATIONS USER MUST READ AND UNDERSTAND Because of potential hazards associated with this type of equipment, no alterations shall be made to the product. THESE DETAILS BEFORE ANY USE OF THE TOOL.
- Page 3 ASSEMBLY INSTRUCTIONS 2. To lower load: Re-check to make sure release valve is tightly closed. Then, operate the jack handle until the load is raised 1. Remove 2-piece handle from box. Insert narrow portion enough to remove the jack stands. of top section (17) into bottom section (15) and secure with bolt (16) provided.
- Page 4 TROUBLESHOOTING PROBLEM ACTION 1. Unit will not lift load Purge air from hydraulic system by following procedure under OPERATING INSTRUCTIONS. 2. Unit will not sustain load or feels “spongy” under load. Purge air from hydraulic system as above. 3. Unit will not lift to full height. Purge air from hydraulic system as above.
Need help?
Do you have a question about the RFJ-6HD and is the answer not in the manual?
Questions and answers