Ranger Products RFJ-4000AL Installation And Operation Manual

Aluminium quick jack

Advertisement

Quick Links

INSTALLATION AND OPERATION MANUAL
Aluminium Quick Jack
Model: RFJ-4000AL
SHIPPING DAMAGE CLAIMS
When this equipment is shipped, title passes to the pur-
chaser upon receipt from the carrier. Consequently,
claims for the material damaged in shipment must
be made by the purchaser against the transporta-
tion company at the time shipment is received.
PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR TO
INSTALLATION AND OPERATION. BY PROCEEDING YOU AGREE THAT YOU
FULLY UNDERSTAND AND COMPREHEND THE FULL CONTENTS OF THIS
MANUAL. FORWARD THIS MANUAL TO ALL OPERATORS. FAILURE TO
OPERATE THIS EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH.
BE SAFE
Ranger™ Floor Jacks are designed and built
with safety in mind. However, proper training and
thoughtful operation on the part of the operator can
increase your overall safety. DO NOT operate or
repair this equipment without reading this manual
and the important safety instructions shown inside.
Rev. A2 – October 2020
Keep this operation manual near the
machine at all times. Make sure that
ALL USERS read this manual .
1645 Lemonwood Dr.
Santa Paula, CA. 93060, USA
Tel: 1-805-933-9970
Toll Free: 1-800-253-2363
Fax: 1-805-933-9160
www.rangerproducts.com
P/N 5900185

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RFJ-4000AL and is the answer not in the manual?

Questions and answers

Summary of Contents for Ranger Products RFJ-4000AL

  • Page 1 OPERATE THIS EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH. Rev. A2 – October 2020 P/N 5900185 INSTALLATION AND OPERATION MANUAL Aluminium Quick Jack Model: RFJ-4000AL Keep this operation manual near the machine at all times. Make sure that ALL USERS read this manual . SHIPPING DAMAGE CLAIMS...
  • Page 2: Warranty Policy

    Defective parts replaced at no charge must be returned • Freight damaged items. If your shipment arrives to your dealer or Ranger Products™ within 60 days of damaged you must note the damage on the car- the date that the replacement parts are shipped; other- rier’s delivery record in accordance with the carrier’s...
  • Page 3: How To Return Products

    BendPak preferred carrier freight collect. Products returned C.O.D. will be refused. Unauthorized freight collect charges will be denied. Ranger Products 1645 Lemonwood Dr. Once an item arrives at BendPak / Ranger, we will issue a full or partial credit, exchange or refund within 15 days.
  • Page 4: Owner/Operator Responsibility

    ALTERATIONS THIS OPERATING MANUAL CONTAINS IMPORTANT DETAILS CONCERNING THE SAFE OPERATION OF THIS FLOOR JACK. Because of potential hazards associated with this type of THE USER MUST READ AND UNDERSTAND equipment, no alterations shall be made to the product. THESE DETAILS BEFORE ANY USE OF THE FLOOR JACK.
  • Page 5: Operation

    ASSEMBLY INSTRUCTIONS Lower the load to rest on the jack stands. Then, make sure that the release valve on the jack is closed tightly (twist the Handle clockwise). 1. Assemble Upper and Lower Handle, insert into Handle Socket and tighten Bolt. 2.
  • Page 6: Specifications

    FEATURES — Lightweight for easy portability — Roller-cam plungers and u-joint release — Aircraft grade billet aluminum design — Alloy-plated ram — Low profile single piece front roller — Double-sealed hydraulics for longer service life — Oversized knurled aluminum handle —...
  • Page 7: Parts Breakdown

    PARTS BREAKDOWN PARTS BREAKDOWN Item # Description Qty. Item # Description Qty. Rubber Pad M16 Nylon Lock Nut Saddle Pin M12 Nylon Lock Nut Saddle Rear Caster Assembly Saddle Washer Tie Rod Lift Arm Assembly Handle Base Front Wheel Handle Set Screw Front Axle Upper Handle M10 Flat Washer...

Table of Contents