Table of Contents
Advertisement
Press the multi-function button
8.
a The rotary spit is switched on. The oven light comes
on.
13 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
13.1 Cleaning agent
To avoid damaging the different surfaces of the appli-
ance, do not use unsuitable cleaning agents.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
ATTENTION!
Unsuitable cleaning agents damage the surfaces of the
appliance.
Do not use aggressive or abrasive cleaning agents.
▶
Suitable cleaning agents
Only use cleaning agents that are suitable for the differ-
ent surfaces on your appliance.
Appliance
Surface
Suitable cleaning agents Information
Stainless steel
¡ Hot soapy water
¡ Special stainless steel
Enamel, plastic,
¡ Hot soapy water
painted, and
screen-printed
surfaces
E.g. control panel
Knobs
¡ Hot soapy water
Gas hotplate
¡ Hot soapy water
burners and pan
supports
Plinth drawer
¡ Hot soapy water
Appliance door
Area
Suitable cleaning agents Information
Door panels
¡ Hot soapy water
.
cleaning products
suitable for hot sur-
faces
12.4 Switching the rotary spit and grill off
Once the food is cooked, switch off the function se-
1.
lector. Press the multi-function button.
a The rotary spit is switched off. The oven light goes
out.
Once the oven has cooled down, remove the pro-
2.
tective plate.
Do not use cleaning products with a high alcohol
▶
content.
Do not use hard scouring pads or cleaning
▶
sponges.
Do not use any special cleaners if the appliance is
▶
still warm.
Using oven cleaner in a hot cooking compartment
damages the enamel.
Do not use oven cleaner in the cooking compart-
▶
ment when it is still warm.
Remove all food remnants from the cooking com-
▶
partment and the appliance door before you next
heat up the appliance.
New sponge cloths contain residues from production.
Wash new sponge cloths thoroughly before use.
▶
Follow the instructions on cleaning the appliance.
→ "Cleaning the appliance", Page 20
To prevent corrosion, remove any limescale, grease, starch or albu-
min (e.g. egg white) stains on stainless steel fronts immediately.
Apply a thin layer of the stainless steel cleaning product with a soft
cloth.
Do not use glass cleaner or a glass scraper.
Clean with a dish cloth and dry with a soft cloth.
Do not remove or scrub.
Clean the burner parts and pan support with a dish cloth.
Only use a little water. Water must not be allowed to enter the inside
of the appliance through the burner compartments.
Do not clean in the dishwasher.
Clean with a dishcloth.
Do not use a glass scraper or stainless steel wool.
Cleaning and servicing en
19
Advertisement
Table of Contents
