Table of Contents
Advertisement
en Rotary spit
Note: The section contains many setting values for
grilling with the rotary spit.
Select the appropriate oven temperature from the in-
formation given in the table.
If the temperature is too high, the meat or poultry will
burn on the outside, while it will remain largely un-
cooked on the inside.
12.2 Inserting the rotary spit
Place the rotary spit support on the baking tray.
1.
Place the rotary spit on the support.
2.
Place the baking tray or the universal pan in at shelf
3.
position 1 as far as it will go.
There is an opening in the back wall of the oven. In-
sert the rotary spit there.
18
Release the handle and close the oven door.
4.
12.3 Switching the rotisserie spit and grill
on
To switch on the rotary spit, follow the instructions be-
low. To grill with the rotary spit, insert this before you
follow the instructions below.
WARNING ‒ Risk of fire!
Escaping gas may ignite.
If the burner does not ignite after 15 seconds, turn
▶
the control knob to the "Off" position and open the
door or window in the room. Wait at least one
minute before igniting the burner again.
In the event of the burner flames being accidentally
▶
extinguished, turn off the burner control and do not
attempt to re-ignite the burner for at least one
minute.
ATTENTION!
The burner may go out accidentally.
If the burner's flame accidentally goes out, switch off
▶
the burner's selector and wait at least one minute
before igniting the burner again.
The gas grill only works when the protective plate is in-
serted.
Ensure that the protective plate has been inserted
▶
correctly.
Open the top cover, if available.
1.
The top cover must remain open while the appli-
ance is running.
Turn on the main gas supply to the appliance. Insert
2.
the plug in the socket. Open the oven door.
Insert the protective plate with the symbol facing up-
3.
wards in such a way that the lugs lie completely in
the notches.
There are three notches below the control panel. In-
sert the three lugs on the protective plate into the
three notches.
Close the oven door so that it is as close as pos-
4.
sible to the protective place.
Push in the function selector and turn it clockwise to
5.
the grill setting
.
Keep the function selector pressed in and press the
6.
ignition button at the same time.
Keep the function selector pushed in for 10
seconds so that the safety pilot starts up.
a The safety pilot is activated. If the gas flame goes
out, the gas supply is automatically shut off by the
safety pilot.
Check whether the flame is burning.
7.
If the flame is not burning, repeat the steps.
Advertisement
Table of Contents
