Hunter 45032-01 Owner's Manual And Installation Manual page 13

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-8. First install candelabra bulbs (60 Watt Maximum) into the sockets.
7-9. If the fandangle is attached to the extra pull chain, remove it now.
7-10. Thread the fan pull chain through the hole in the metal disc. Then,
thread the fan pull chain through the hole in the center of the glass
bowl.
7-11. Thread the light pull chain through the hole in the center of the
glass bowl. Then, Thread the light pull chain through the hole in
the center of the cover plate.
7-12. Thread the fan pull chain through the grommet hole in the side of
the cover plate.
7-13. Place the cover plate up against the glass bowl. Align the holes in
the cover plate and glass bowl.
7-14. Thread the light pull chain through the finial and screw the finial
onto the threaded rod end until tight.
7-15. Reattach the fandangle to the extra pull
chain.
Breakaway
Connector
13
45032-01 • 11/05/08 • Hunter Fan Company
Light Bulb
Sockets
(60 Watt
Maximum)
Metal Disc
Metal Rod
Glass Bowl
Cover Plate
Finial