Table of Contents
Advertisement
SAMPLE CONNECTION DIAGRAM
MANUAL CONTROL
The front panel features 8 LED digital displays, labeled A-H, corresponding to the eight SDI
outputs. Press the button below the LED display to increment the input source number, from 1
to 8 and then back to 1 again. Any output channel can use any of the inputs.
REMOTE CONTROL
Note: Before using the included remote control, remove the plastic insert that protects the
installed battery from accidental discharge.
• Power: Press the Power button to turn the matrix ON or OFF. Note that the Power
switch on the front panel must be set to the ON position for the remote control's
Power button to function.
• Reset: Press the Reset button to reset the matrix to its factory default settings and
channel selections.
6
Advertisement
Table of Contents
