Table of Contents
Advertisement
Quick Links
For Your Records and
Warranty Assistance
For reference, also attach your receipt or a copy
of your receipt to the manual.
__________________________________________
Model Name
__________________________________________
Model No.
__________________________________________
Date Purchased
__________________________________________
Where Purchased
Form# 41753-01
20100217
©2010 Hunter Fan Co.
Type 5 Models
Type 5 Models
Type 5 Models
Owner's Guide and Installation Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Hunter 41753-01
Summary of Contents for Hunter 41753-01
- Page 1 For reference, also attach your receipt or a copy of your receipt to the manual. __________________________________________ Model Name __________________________________________ Model No. __________________________________________ Date Purchased __________________________________________ Where Purchased Form# 41753-01 20100217 ©2010 Hunter Fan Co. Type 5 Models Type 5 Models Type 5 Models Owner’s Guide and Installation Manual...
-
Page 2: Table Of Contents
8 • Operating and Cleaning Your Ceiling Fan ....... 13 9 •... -
Page 3: Preparing The Fan Site
If you want to use an existing fan site, complete the following checklist to determine if the site is acceptable and safe for your new Hunter fan. If you cannot check off every item, prepare a new fan site as described on this page. - Page 4 3-1. Attach a 2” x 4” support brace between two joists. Position it to allow you to recess the bottom of the outlet box a minimum of 1/16” into the ceiling. 3-2. Check the support brace to ensure it will support the full weight of the fan and light kit.
- Page 5 Understanding Mounting and Installer’ s Choice® Hunter’s patented 2-position mounting system provides you maximum installation flexibility and ease. You can install your Hunter fan in one of two ways, depending on ceiling height and your preference: Standard or Angled mounting. The steps in this manual include instructions for both Installer’s Choice mounting methods.
-
Page 6: Getting Ready
• Drill holes for and install wood screws. • Identify and connect electrical wires. • Lift 40 pounds. If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician. Gathering the Tools You will need the following tools for installing the fan: •... -
Page 7: Installing The Ceiling Plate
Tighten the screws into the 9/64” pilot holes; do not use lubricants on the screws. Do not over tighten. Flat Washer 41753-01 • 02/17/10 • Hunter Fan Company For Angled Ceilings: Be sure to 3” Wood Screw orient the ceiling plate so that the arrows printed on the ceiling plate are pointing toward the ceiling peak. -
Page 8: Assembling And Hanging The Fan
3-1. Unbundle the wires from the fan. For Standard or Angled mounting: 3-2. To assemble fan to hang down from a flat or angled ceiling, insert the downrod through the canopy. Feed the wires from the fan through the downrod. -
Page 9: Wiring The Fan
Connector Dual Switch Wiring Single Switch Wiring 41753-01 • 02/17/10 • Hunter Fan Company 4 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. -
Page 10: Installing The Canopy
5-3. Twist canopy counterclockwise to secure. 5-4. Install third canopy screw in round hole on canopy. Securely tighten all three screws. 41753-01 • 02/17/10 • Hunter Fan Company 5 • Installing the Canopy Steps 5-4 Steps 5-1– 5-3... -
Page 11: Assembling The Blades
Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. -
Page 12: Completing Your Installation
7-5. Connect the upper plug connector from the motor to the lower plug 7-6. To attach the lower switch housing, align the side screw holes in the Step 7-4 Note: You can customize your Hunter fan with a number of accessory light kits. Steps 7-5 –... -
Page 13: Fan
8 • Operating and Cleaning Your Ceiling Fan 8-1. Turn on electrical power to the fan. 8-2. The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off. • Pull the chain slowly to change settings. - Page 14 7% on energy costs. So, you can cut back on expensive air conditioning...and save up to 40%* on cooling. In winter, your Hunter fan recirculates warm air and saves up to 10%* on heating bills.
-
Page 15: Troubleshooting
2. Tighten all blade iron screws. 3. Turn power off, support fan very carefully, and check that the hanger ball is properly seated. 41753-01 • 02/17/10 • Hunter Fan Company 9 • Troubleshooting If you need parts or service assistance, please call...
Need help?
Do you have a question about the 41753-01 and is the answer not in the manual?
Questions and answers