Advertisement
DEPTH ADJUSTMENT
Knob Bolt
FOOT PLATE INSTALLATION
Knob Bolt
[p] Flat Screw
-4-
Scale
Base Line
Base
Gear Case
1. Loosen the Knob Bolt.
2. Set the Base line with the Scale line of
requiring cut depth.
3. Tighten the Knob Bolt.
[CAUTION]
(1) Surely connect with Cleaner, otherwise the
dust can not be collected.
(2) Use the scale just for a reference.
Cut Depth
*G13SB3/SE2 need [n] Foot Plate to offset the
projecting of Gear Case of the Grinder beyond
the bottom surface.
1. Complete the installation of Grinder and Blade.
2. Loosen the Knob Bolt.
3. Set the Main Unit on [n] Foot Plate.
4. Tighten Knob Bolt.
5. Tighten [p] Flat Screws from the bottom
surface, with the Front Guide matched with
the groove of the Foot Plate.
Front Guide
[CAUTION]
Blade Change and Depth Adjustment is
impossible when using with Foot Plate.
groove
[n] Foot Plate
Connect Dust Bag or Cleaner to the duct.
T-Guide (Bar 12 x 3) is adaptable.
*T-Guide : Optional.
T-Guide
Advertisement
