Advertisement
Close
CUTTING (SELF VACUUM)
Insert deeply
[b] Dust Bag
Base
Rotating direction
N G
CUTTING (WITH CLEANER)
Rotating direction
Knob Bolt
Surely close the Main Unit and tighten the Knob Bolt.
Confirm NO opening at the back side.
Duct
CUTTING
DIRECTION
Duct
CUTTING
DIRECTION
O K
Surely connect [b] Dust Bag to the duct,
then turn the Grinder on and start cutting.
Dust Bag should be emptied with every 3m of cutting.
[CAUTION]
1. Confirm the direction of cutting and Blade rotation.
2. Keep NO gap between the material, otherwise the
dust should leak out from the bottom.
3. Keep closing the Base, otherwise the dust should
leak out from the opening.
4. Do NOT use worn-out blade, otherwise the dust
collection performance should be dropped off.
5. Confirm that the fastener of the Dust Bag is
securely closed.
6. Do NOT wash the Dust Bag.
N G
Surely connect Cleaner Hose to the duct of Main Unit,
then turn Grinder/Cleaner on and start cutting.
[CAUTION]
1. Confirm the direction of cutting and Blade
rotation.
2. Keep NO gap between the material, otherwise
the dust should leak out from the bottom.
3. Do NOT use worn-out blade, otherwise the
dust collection performance should be drop off.
4. Use proper adapter between Duct and Hose.
(Duct diameter : 34mm )
N G
N G
-3-
Advertisement
