Advertisement
Quick Links
WARNING
・Only use the correct connector for each angle grinder. If any connector does not fit correctly then DO NOT use the HURRICANE
with this angle grinder.
・HURRICANE is only for grinding concrete, block, and tile. DO NOT use for grinding steel or other materials.
・HURRICANE is only for Diamond Cup Wheels. DO NOT use with abrasive wheels or other tools.
・Always check the HURRICANE for damage, cracks, or deformation before use. DO NOT use the HURRICANE if it is cracked,
damaged or bent as this could lead to injury.
・Be sure to wear protective goggles, a dust mask, protective foot wear, earplugs and other protective equipment when working.
・Keep the HURRICANE away from gasoline, solvents, and paraffin.
・Ensure the grinding material is securely clamped before working.
SPECIFICATIONS
Model Code
NKC-125
Suitable Tool
100mm - 125mm Diamond Cup Wheels.
Weight
340g (Main Unit)
Concrete, Block, Tile, ...etc.
Material
HITACHI
Suitable
Angle Grinders
MAKITA
※2014 models only.
BOSCH
DEWALT
METABO
MILWAUKEE
FLEX
OVER VIEW
[a]
[a] Main Unit, [b] Sub Cover, [c] Half Cover, [d] M-Connector, [e] H-Connector, [f] B-Connector, [g] D-Connector, [h] F-Connector,
[i] Collar, [k] Wrench, [m] Base Flange, [n] T4.5 Spacer, [o] T7.3 Spacer, [p] T7.3 x iD16 Spacer, [q] Hose Adapter.
NKC-125
INSTRUCTION MANUAL
G12SN, G12SQ, G12VA, G12SS, G12SA3, G12SR3, G13SN, G13SQ, G13YF, G13VA, G13SS, G13SB3, G13SR3
9553NB, 9554NB, 9554NBKD, 9554NBKWX, 9555NB, 9557NB, 9557NBD, 9558NB, 9564CV, 9564H, 9564PCV,
9564PZ, 9565CV, 9565H, 9565PCV, 9565PZ, GA4530, GA4530KD, GA4534, GA5034
GWS7-115, GWS7-115E, GWS8-115, GWS8-125, GWS10-125, GWS11-125CI, GWS11-125CIE, GWS14-125CI,
GWS14-125CIE, GWS14-125CIT, GWS14-125Inox, GWS15-125CIH, GWS15-125CIEH, GWS15-125CITH
D28113, D28113K, D28117, D28135K, DWE4050, D28065, D28134
WEPBA14-125, WEBA14-125, WEPA14-125, WEP14-125, WEA14-125, WE14-125VS, WE14-125, WPA11-125,
WP11-125, WBA11-125, WB11-125, WA11-125, W11-125, WE9-125, WP8-125, W8-125
AG8-115, AG8-125, AG9-125XC, AG9-125XE, AG12-125X, AGV12-125X, AGV12-125XPD, AGV15-125XC, AGV15-125XE
L3309/125, L3309FR, L3309FRG, L3410FR, L3410VR
[c]
[d]
[b]
[i]
[k]
[g]
[h]
[e]
[f]
N300180_Rev3
[p]
[q]
[o]
[n]
[m]
-1-
Advertisement
Related Manuals for NAKAYA Hurricane NKC-125
Summary of Contents for NAKAYA Hurricane NKC-125
- Page 1 NKC-125 INSTRUCTION MANUAL N300180_Rev3 WARNING ・Only use the correct connector for each angle grinder. If any connector does not fit correctly then DO NOT use the HURRICANE with this angle grinder. ・HURRICANE is only for grinding concrete, block, and tile. DO NOT use for grinding steel or other materials. ・HURRICANE is only for Diamond Cup Wheels.
- Page 2 PREPARATION WARNING ・Be sure to turn off the angle grinder and remove the plug from the electrical outlet in advance. ・If the connector is loose and cannot be securely attached on the angle grinder, do NOT use HURRICANE in this state. otherwise it could lead to injury.
- Page 3 4. Set the Cup Wheel. (1) Fit the correct Spacer [n] [o] [p] onto the spindle. (2) Fit [m] Base Flange (or the standard flange from the angle grinder) onto the Spacer. (3) Fit the Cup Wheel onto the [m] Base Flange. Wrench (4) Fit the Wheel Nut onto the spindle.
- Page 4 3. Start the grinding work in the same process of Wall Page 3 "GRINDING". * Keep the surface of [c] Half Cover in contact with the wall during work. Vacuum hose Oct-29 2014 Head Office in Japan NAKAYA CO.,LTD. 1313-92 Yanagisawa, Sanjo, Niigata, Japan Eto Naoya Managing Director...