Assembly Step 4 - Horizon Fitness T101 Owner's Manual

ASSEMBLY STEP 4
HArDWArE BAG 4 CONTENTS :
BOLT (E) SPRING WASHER (C)
15 mm
15 mm
Qty: 4
Qty: 4
CONSOLE
ASSEMBLE
LEFT SIDE
FIRST
FLAT WASHER (D)
15 mm
Qty: 4
WATER BOTTLE POCKETS
CONSOLE CABLES
FLAT WASHERS (D)
SPRING WASHERS (C)
BOLTS (E)
CONSOLE MAST
A Disengage the deck lock latch with your foot to
lower the running deck.
B Open hardware bag 4.
C gently place the console on top of the console
masts. Attach the left side first using 2
bolts (e), 2 spring washers (c) and 2 flat
washers (d).
Connect the console cables, carefully tucking
D
wires in masts to avoid damage.
Attach the right side of the console using 2
E
bolts (e), 2 spring washers (c) and 2 flat
washers (d).
NOTE: Be careful not to pinch any wires
while assembling the console.
Insert water bottle pockets into console.
F
g Before the first use, lubricate the treadmill deck by
following the instructions in the MAINTENANCE
section in the TREADMILL gUIDE.
YOU ARE FINISHED!
9