How To Use - Electrolux GC58V Instruction Manual

4. How to Use

Gas Control Knobs
The burner lighting buttons are located on the
control panel.
Superatomatic lighting
The cooktop with superautomatic lighting allows
the burners to be turned on only by pressing the
control buttons.
1 Press and turn the knob to the left of the star
position.
2 Then adjust the flame as desired.
If, after several attempts, the flame does not light,
check whether the covers (7a) and the spacers
(Figure 7B) are correctly mounted.
To turn off the burner flame, turn the knob
clockwise to the off position (
To light a burner in the event of a power failure,
bring a flame (flame match), press the button and
turn counterclockwise to the maximum position.
(figure 6)
•
).
Cover
Spreader
Spark plug
Base
Nozzle
ATTENTION
If the flame does not come on after 15
Seconds or accidentally turn off Turn the
knob to the "•" (OFF) position and Wait at
least a minute before trying Turn on the
burner again.
25