Edwards & Co Avery Capsule FA0062 Use & Care Manual page 44

AVER Y C AP SULE - USE + C A R E GU ID E
Wash capsule fabric, newborn support liner, head wings and lumbar
wedge on a gentle cycle, or hand wash, in warm or cold water only.
Water should not exceed 30 degrees celsius. Drip dry.
NEVER wash the newborn support liner with the head wings in place. The
head wings must be separated from the newborn support liner before
washing.
Handwash the harness using mild detergent diluted in water (such as
laundry liquid). Drip dry.
NEVER machine wash the harness.
See care labels for specific instructions regarding machine washing
Dry your Avery Capsule and its parts thoroughly
Ensure the Avery Capsule and its parts are dried thoroughly before
storage. Mould cannot be removed and mouldy parts must be discarded.
NEVER tumble dry any part of the Avery Capsule.
NEVER wring any Avery Capsule fabrics.
Store your Avery Capsule and accessories carefully
Store inside in a well ventilated, dry area.
Do not store in a damp environment that is not well insulated (such as an
unfinished basement or outdoor shed).
Do not store in areas where high temperatures may occur, such as in car
boots, a roof space or beside shed walls which can get hot.
Store when dry, not damp or wet.
Store away from direct sunlight. Direct sunlight could cause fabric
fading, material damage and fading of manufacturer's stickers.
NEVER place heavy items on top of the Avery Capsule. This may distort
the plastic.
44