Adjusting The Harness Length - Edwards & Co Avery Capsule FA0062 Use & Care Manual

A VE R Y CA PS U L E - US E + C A R E G UI D E

Adjusting the harness length

Replicate the previous illustration but
make sure the harness set up is as
shown in image. See red outline.
Note:
The harness can be set at two different lengths:
Newborn length (Loop 1)
The harness is set at this length
for first use.
1 . Turn the capsule
over and locate
the metal splitter
plate that the
harness webbing
is connected to.
Note:
This
diagram shows
the harness
connected part
way up the
webbing, on
Loop 1.
Replicate the previous illustration but
make sure the harness set up is as
shown in image. See red outline.
Illustrate the left side then duplicate
and reflect to create the right. Make
sure buttons, labels etc are present
where they are shown in photo
Extended length (Loop 2)
Adjust once the newborn length is
too short for your baby.
2 . Locate the small split in the
metal plate. Slide the harness
off through this split.
20