Edwards & Co Avery Capsule FA0062 Use & Care Manual page 19

A VE R Y CA PS U L E - US E + C A R E G UI D E
3 . Locate the small split in the
metal plate. Slide the harness
off through this split.
5 . Ensure there are no twists in
the harness webbing and re-
insert it through the desired
slot in the capsule shell.
4 . Pull the harness webbing
through the shell from the
front of the capsule.
6 . To re-attach the harness,
guide the loop at the end of
the harness webbing through
the split in the metal splitter
Illustrate the left side then duplicate
and reflect to create the right. Make
plate. Ensure no part of the
sure buttons, labels etc are present
webbing is still within the split
where they are shown in photo
and that the harness is not
twisted in any way.
19