Benchmark BSH6000 Operation Manual page 8

BSH6000 Operation manual Chapter 4 Operation Guide
2. Timer Operation (Advanced)
The default setting of the instrument is designed so that the heater will continue to
hold the set temperature even once time has expired and "oVEr" is showing on the
time display. This setting can be adjusted so that the heater will shut down once
time has expired. To adjust the advanced timer setting pres the "Mode" key and
hold it for 10 seconds. After 10 seconds, the display will show "OP:1" use the  or
 key to select "OP:2". The setting has now been changed and can be stored by
pressing the "Start/Stop" key.
— 6 —