Equipment Information to Save .... 2 tions to easily load new recipes to handle tion or operation of this product, contact Authorized Service Agency ....2 new and expanding menus. Antunes Technical Service toll free at Safety Information ........ 3 +1-877-392-7854. Before Use Operation ..........3 Fill in the information below and have it Normal Operating Pressure ....
Have the steamer serviced only y Read all instructions before by qualified personnel. Contact y Chlorides or phosphates in using equipment. Antunes Technical Service cleaning agents (e.g., bleach, y For your safety, the equipment is for adjustment or repair. sanitizers, degreasers, and...
Harder water may require more frequent periodic maintenance to remove excess lime scale and maintain steamer performance. Antunes part number 7002105 Water Sample Kit can be requested to check water hardness. Hard water (>7 GPG) can be treated with a reverse osmosis system or an ion-exchange water softener system to minimize periodic maintenance.
If the water line pressure to the Figure 1. Components steamer is greater than 45 PSIG, Touchscreen then install Antunes part number 7000314 Water Pressure Regula- Treat the GUI interface with the same care This unit is equipped with a touchscreen tor Kit (included) between the as you would any touchscreen device.
Operating Instructions and continue with food preparation as required. Touchscreen GUI DISPLAY Plug the power cord into the When cooking is complete the unit appropriate outlet. Press the power returns to the Ready screen. button to turn the unit on. After displaying start up information, If required, you can press Pause the display shows the following...
Menu Items Editing a Menu Item Creating New Menu Items Creating new menu items follows the Follow these steps to create new menu If you press Edit Menu Item , the same procedure as editing an existing items, edit existing menu items, delete system displays a list of the existing menu item.
System Settings Loading Menu Data Follow these steps to access and edit the The unit is equipped with a USB interface Use the Up and Down arrows system settings. on the back of the unit. This allows for ) to select the proper file name.
Maintenance Daily Cleaning CAUTION Press the Power button to turn the NOTE: Frequency of cleaning Chlorides or phosphates in cleaning unit off. The unit enters a cool- is determined by water agents (such as bleach, sanitizers, down mode and will shut down conditions, usage and water degreasers, or detergents) could automatically.
Use a twisting motion to scrape openings clean. NOTE: Antunes part number 7002129 Steam Generator Kit Cleaning Tool Steamer has a wire brush, pipe brush, and a tool designed to clean the orifices in the generator.
Troubleshooting Problem Possible Cause Corrective Action Power cord not correctly plugged in Plug in the power cord correctly. The power cord and/or electrical plug is Unit displays system error: Inspect electrical wire, plug, and receptacle. damaged “Zero Cross” Control board is inoperable Contact your maintenance person or Authorized Service Agency for service.
3020132 Insert NOTE 3040105 Nut, Hex ‘KEPS’ #4-40 Zinc Use only genuine Antunes replacement parts in this unit. Nut, Hex ‘KEPS’ #06-32 Steel; 3060130 Use of replacement parts other than those supplied by the Zinc Plated manufacturer will void the warranty.
The remedies described above are exclusive and in no event shall Antunes be liable for special consequential or incidental damages for the breach or delay in performance of this warranty.
Need help?
Do you have a question about the RS-1000 and is the answer not in the manual?
Questions and answers