Pin Connection For Pluggable Sensors; Electrical Connection - Rechner Sensors KAS-80 Series Instruction Manual

Pin connection for pluggable sensors

Pin connection for pluggable sensors (top view)
4 3
1 2

Electrical connection

Disconnect the system from power. Then connect the device according to the connection diagram.
Operating voltage (U
B
The indicated load (R
L
For further technical data, please refer to the technical data sheet of the sensor you are using. A
large number of data sheets can be found on our website: www.rechner-sensor.com.
4 3
5
1 2
Series 80
) 15...30 V DC
) needs to be considered and should not be more or less.
The protective earth connection
i
(Pin 5) is only present on sensors with
metal housing and earth connection.
Series 40
15...35 V DC,
Ui = 27 V DC
Series 42
10...35 V DC
13