(Side-Mount Type); Fast Idle Lever (Side-Mount Type) - Honda BF30D Owner's Manual

The switch clip must be inserted in
the emergency stop switch in order
for the engine to start and run. The
lanyard must be attached to the
operator's PFD (Personal Flotation
Device) or worn around the wrist as
shown.
When used as described, the
emergency stop switch and lanyard
system stops the engine if the
operator falls away from the controls.
A spare switch clip is stored in a slot
in the control housing (optional
equipment).
SPARE SWITCH CLIP
Fast Idle Lever

(side-mount type)

GEARSHIFT/THROTTLE
CONTROL LEVER
The fast idle lever is used to set idle
speed during warm-up.
The lever will not move unless the
gearshift/throttle control lever is in
the N (neutral) position. Conversely,
the gearshift/throttle control lever
will not move unless the fast idle
lever is in the lowest position.
CONTROLS AND FEATURES
N (neutral)
FAST IDLE
START
Leave the fast idle lever in the
START position to provide a rich
fuel mixture for starting a cold
engine.
Lift the fast idle lever to warm up a
cold engine after starting and to start
a warm engine.
FAST IDLE LEVER
21