Propeller Replacement - Honda BF30D Owner's Manual

Propeller Replacement

Before replacing the propeller,
remove the clip from the engine stop
switch to prevent any possibility of
the engine being started while you
are working with the propeller.
The propeller blades may have sharp
edges, so wear heavy gloves to
protect your hands.
SERVICING YOUR OUTBOARD MOTOR
Removal
Remove the cotter pin, unscrew the
castle nut, remove the washer, then
remove the propeller and thrust
washer.
THRUST WASHER
Installation
Install the propeller in the reverse
order of removal.
Install the thrust washer with the
grooved side toward the gear case.
Use a genuine Honda stainless
cotter pin and bend the pin ends as
shown.
MARINE GREASE
PLAIN
WASHER
CASTLE
NUT
COTTER PIN
PROPELLER
(stainless)
COTTER PIN
(stainless)
83