Singer Ultima Instruction Manual page 11

16
PREPARATION
To plug in the ironing press
- Connect the supply cord to the plug at the rear of the
press.
- Connect the supply cord to the socket outlet and
switch on. For your own safety, check that you have
an earth plug.
14. On/Off switch (according to model)
- After having plugged in the press, depress the main
On/Off switch .
- The red signal lamp confi rms that the upper plate and
the steam boiler are heating.
15. Temperature control
– Having switched on your press, the temperature
signal lamp will light at the same time.
– The temperature signal lamp goes out when
the temperature corresponding to the selected
position on the thermostat is reached. It lights and
goes out regularly during the ironing operation.
Caution : the signal lamp will not light when the
thermostat is on , but the steam generator is heating.
16. Selecting the proper temperature
The quality of the pressing depends partly on the
quantity of the steam you use and partly on using a
suitable heat. Labels on articles to be pressed indicate
the correct ironing temperature using the following
International ironing
Symbols :
˜ Minimum heat
˜ ˜Medium heat
˜ ˜˜ Maximum heat
These symbols are marked on the thermostat selector
of the machine.
- Turn the thermostat to the position corresponding to
the fabric to be pressed and to the symbol indicated
on the fabric label.
When the thermostat is opposite the sign
board does not heat.
11
ENGLISH
, the