Table of Contents
Advertisement
FIG. 1.
Pull the kickplate off the magnets.
FIG. 2.
Never brush across the coil fins.
FIG. 3.
Verify all blockages have been removed.
TEC_TM_120 REV. B
M A I N T E N A N C E , C A R E & C L E A N I N G
02/02/2022
IMP ORTANT WARR ANT Y
INFORM ATION
T HE CL E A NING O F T HE C OND EN SER I S NO T
C O V ER ED BY WA R R A N T Y !
If you have any questions, please contact your local
TRUE Manufacturing Service Department. See contact
information on pages 12, or 70.
• Condenser coils accumulate dirt and require
cleaning every 30 days or as needed.
• A dirty condenser coil can result in non-warranteed
repairs and/or cabinet failure.
• Proper cleaning involves removing dust from the
condenser by using a soft brush, vacuuming the
condenser with a shop vac, or using CO
or pressurized air.
• Do not place any filter material in front of the
condensing coil.
IF YOU C A NNO T A D EQUAT ELY R EMO V E T HE
DIR T, P L E A SE C ON TA C T YOUR L ICEN SED
R EF R IG ER AT ION SER V ICE P R O V ID ER .
CONDENSATION
Excessive condensation can be caused by leaving the
door/drawer open for long periods of time or running
the cabinet with little to no product inside.
A DA HE I GH T IN STA L L GUID E
, nitrogen
2
Page 59 of 74
Advertisement
Table of Contents
