Table of Contents
Advertisement
ADA-COMPLIANT INS TALL ATION
ROUG H OPENING & PL AN VIEWS
[32 " (81 3 mm) OPENING]
The ADA-compliant installation consists of the ADA
unit, standard leveling legs, and 4" (102 mm) kickplate.
This installation fits beneath an ADA-compliant
countertop. For the rough opening and cabinet
specifications of alternate installation configurations,
please see "Optional Installation Rough Openings &
Plan Views" starting on page 21.
A DA - C OMP L I A N T R OUGH OP ENING
Please see the recommended dimensions for a ADA-
compliant rough opening below. For unit specifications,
please see "ADA-Compliant Installation Plan Views"
starting on page 16.
CU T OU T OP ENING S
To minimize the depth of the cutout opening, the
electrical outlet must be positioned as shown below.
Outlet must be flush with the wall.
Rear wall of cut out
2"
(51 mm)
A N T I - SW E AT F O A M END PA NEL S
When installing two or more True units side-by-side,
be sure to leave at least 5/8" (16 mm) gap between the
cabinets, or install foam pads between the cabinets
and on any side with 0" clearance, to prevent moisture
from developing on applications.
If installing anti-sweat foam end panels, True
recommends applying a panel to each of the
units being joined together. To order foam pads,
contact our parts department at
TrueResidentialParts@TrueMfg.com.
Page 16 of 74
T RUE RE S ID E N TI A L
P R I O R T O I N S T A L L A T I O N
8"
(203 mm)
2"
(51 mm)
844-849-6226
or
02/02/2022
®
A DA R OUGH OP ENING
HEIGHT
32"
(813 mm)
DEPTH
24"
(610 mm)
WIDTH
24"
(610 mm)
23-7/8"
(606 mm)
Front view
of unit
between
cabinets
3-7/8"
(98.4 mm)
31-7/8"
(810 mm)
TEC_TM_102 REV. B
Advertisement
Table of Contents
