Graco MY RIDE 65 Instruction Manual page 85

Convertible car seat

Hide thumbs Also See for MY RIDE 65:

Lap Belt Installation

Always review your vehicle owner's manual for specific information about your vehicle seat belts.

Locking Latch Plate and No Retractor

When installing the car seat, route the lap seat belt

through the proper path and buckle it in. Then, pull

upwards on the tail of the belt so that the lap belt gets

tight around the car seat.

Sewn On Latch Plate and ALR

Slowly pull the lap belt all the way out. Route the

vehicle seat lap belt through the proper belt path and

buckle it in. Then, pull the lap belt tight while feeding all

the slack back into the retractor.

Grab the sides of the seat at the belt

path and slide the seat side-to-side and

front-to-back. The seat should not move

more than 1" (2.5 cm).