Inter-m PB-6207B Operation Manual page 10

BATTERY CHARGER
8. ADDRESS SETTING SWITCH
It is a switch to set the device number.
For the setting method, please refer to device setting and checking section.
9. LINK IN/OUT TERMINALS
It is a communication terminal for monitoring the charging voltage and current status of this device
from a PC. The LINK IN terminal connects to the previous device and the LINK OUT terminal connects
to the next device.
10. TERMINATION SWITCH (LOAD/OPEN)
This switch is set for stable data transmission/reception of LINK IN/OUT.
For detailed setting method, refer to device setting and checking.
(※ Caution: Communication error may occur if it is not set correctly.)
8 PB-6207B