Philips Sonicare For Kids Manual page 8

ENGLISH
8
This Philips appliance complies with all applicable standards and
The Sonicare For Kids comes with 1 replaceable panel.
1 Remove the adhesive backing from the panel.
2 Apply the panel to the white section on the front of the
handle (Fig. 2).
Note: Make sure you line up the cut-out areas on the panel with the buttons
on the front of the handle.
3 Apply your favorite sticker to the panel as shown on the sticker
sheet (Fig. 3).
1 Rinse the panel in warm water; you may also use a mild detergent
to clean it.
2 Let the panel air dry.
3 Reapply the panel to the white section on the front of the handle.
1 Align the brush head so the bristles point in the same direction as
the front of the handle (Fig. 4).
2 Firmly press the brush head onto the metal shaft until it stops.
Note: There is a small gap between the brush head and the handle.
1 Put the mains plug of the charger in the wall socket.
2 Place the handle on the charger (Fig. 5).