Advertisement
Please note that this process is not reversible.
screwdriver. Observe basic safety precautions when you follow the
surface on which you work.
1
To deplete the rechargeable battery of any charge, remove the handle
from the charger, switch on the Sonicare and let it run until it stops.
Repeat this step until you can no longer switch on the Sonicare.
2
Insert a screwdriver into the slot located in the bottom of the
handle and turn anticlockwise until you see a gap between the
bottom cap and the handle (Fig. 14).
3
Insert the screwdriver into the gap and pry the bottom cap out of
the handle (Fig. 15).
4
Hold the handle upside down and push down on the shaft to
release the internal components of the handle (Fig. 16).
5
Insert the screwdriver under the circuit board, next to the battery
connections, and twist to break the connections. Remove the
circuit board and pry the battery from the plastic carrier (Fig. 17).
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
your country, go to your local Philips dealer.
ENGLISH
13
Advertisement
