Insert The Batteries Into The Remote Control; Power On; Language Selection - Hitachi ULTRA VISION UT32A302 Operating Manual

QUICK START GUIDE (continued)
Insert the Batteries into the Remote
3
Control...
17
4

Power On...

22
q Connect the plug into the wall socket after all other
connections are completed.
CAUTION
Ensure that both ends of the power cord are easily
accessible.
The Main Power Switch is factory set to On
(activated), therefore after you connect the plug into
the wall socket, the color of the indicating lamp must
turn Green and the Illumination Lamp turns Blue.The
image will display on screen.
Once the Main Power switch is on, you can turn On/
Off by pressing the Power (On/Off) button on the
remote control.
If no equipment is connected to the Monitor the color
of the indicating lamp turns to Orange, and the
Illumination Lamp turns off indicating Power Save
Mode.
5

Language Selection

The initial language setting for on-screen displays is English (US).
You can change to your preferred language.
q Press the button to display Main Menu.
w Select "Language" using the
e Select the language you prefer from the list using the
press the button.
OK
button.
button and then
Monitor
Rear
Panel
Illumination Lamp
Indicating Lamp
Main Power Switch
(on the underside)
Front
Rear
Language
Select
AC
Wall
Socket
English
English (US)
Français
Español
Deutsch
OK Set Return
14