Making The Moving Image Smooth - Hitachi ULTRA VISION UT32A302 Operating Manual

SETUP OPERATION (continued)
Watching Images from HDMI/Composite Input (continued)

Making the Moving Image Smooth

Using this function helps to make the moving image smooth.
Select "Picture" from the Menu list.
Selected Items
Film Mode
About "Film Mode"
NOTE
The image might not look natural depending on the image contents.
Phenomena such as
q When switched to the subtitles of a film or images, the image displays fine horizontal streak lines.
w When switched to scenes such as commercial and animation, the image displays fine horizontal streak lines.
e When displaying a ticker or subtitle, the text on the image becomes rough (aliasing).
r When watching the image in Composite mode, which is connected to any external equipment, the OSD of
external equipment displays fine horizontal streak lines.
These phenomena occur due to the method of converting the image. Please note that this is not a malfunction. In
the event that this is disturbing, please set to Off.
In addition, the effect of this menu might vary depending on the aspect setting (See
Also, this might be ineffective depending on the scene of the image.
On: Automatically identifies if it is a movie and faithfully
Off
reproduces the original film images.
Off: Set to Off if the image does not look natural.
This is available only when receiving NTSC, 480i, PAL,
On
SECAM, 576i, or 1080i input signals.
Picture
Contrast Mode
3D Color Management
Black Enhancement
DNR
MPEG NR
Film Mode
3D Comb Filter
Reset
Select OK Set
Setup hint
40
).
Dynamic
Normal
Off
Off
Off
Off
Off
Off
Reset
Return
36