Advanced Setting - Hitachi ULTRA VISION UT32A302 Operating Manual

SETUP OPERATION (continued)
Watching Images from HDMI/Composite Input (continued)

Advanced Setting

Select "Setup" from the Menu list.
Selected Items
Video Power Save
RGB Input
Color System
Watching through the optional D-sub 15 pin - composite cable
NOTE
If your external equipments do not have an HDMI terminal or a DVI terminal,
you can watch images from your external equipments through the optional D-sub 15 pin - composite cable.
1. Connect to your external equipment with the optional D-sub 15 pin - composite cable. (See
2. Switch to RGB input by pressing the
3. Press the
button and select "Setup" from the menu list.
4. Then you can select "Composite" in "RGB Input".
Checking Software Version
NOTE
The Software Version is displayed on Setup(HDMI/Composite) menu.
37
Off
42
See for details.
On
RGB
Select the effective signal.
Composite
Auto
This function is available only if D-sub 15 pin - composite
PAL
cable is used.
SECAM
Selects the color system depending on the input signal.
NTSC 4.43
Generally, select [Auto] to receive all signals.
NTSC 3.58
If the input signal has too much noise, the signal level is
too low or the operation is unstable in [Auto], select the
PAL60
system according to the color system of the input signal.
PAL-M
Composite input only.
PAL-N
or button.
Software Version
Setup
Video Power Save
RGB Input
Color System
VCXXX-XXX XX-X
Select On/Off
Setup hint
19
.)
Setup
Video Power Save
RGB Input
Color System
VCXXX-XXX XX-X
Select On/Off
Off
Composite
Auto
Return
Off
Composite
Auto
Return