Advertisement
Available languages
Available languages
Troubleshooting:
Issue
Device does not start when
the ON / OFF button is
pressed
The unit does not cool enough
Too much noise
code E0
code E2
The device switches itself off
Guarantee
Evolar offers a 24 month warranty. Your warranty is valid if the product is used in accordance with
the instructions and for the purpose for which it was created. The original purchase receipt with the
date of purchase, the vendor name and the item number of the product should be submitted. If you
require service, and warranty questions on
Possible causes
-
Water full indicator
light flashes
-
Room temperature is
lower than the set
temperature
-
No power
-
Windows and doors
are not closed
-
Heat sources in space
-
Air outlet hose is not
connected or blocked
-
Temperature setting is
too high
-
Air supply is blocked
-
Floor is non-planar (or
flat enough)
-
Sound coming from
the flow of the
refrigerant in the air
conditioner
-
Malfunction of the
room temperature
sensor,
-
Water tank full
-
Device is overheated
www.evolar.nl
Possible solutions
-
Empty the water from
the water tank
-
Reset the temperature
-
stabbing plug in the
socket
-
Close all windows and
doors
-
Remove the heat
sources, if possible,
-
Connect the air outlet
hose or clean it
-
Reset the temperature
Clean the air filters
-
-
Place the device on a
flat solid surface
The flowing sound of
-
refrigerant is normal
-
Replace the sensor for
the room temperature
(the device also works
without replacement)
-
Empty the water tank
-
Allow sufficient space
on all sides of the air
conditioner (50CM)
Advertisement
