Advertisement
Available languages
Available languages
Control panel:
1. On / off button
2. Temperature button (up / down)
3. mode button
4. Ventilator settings button
5. Timer on / off button
installation
The Evolar EVO and EVO-07C-09C are mobile air-conditioning / dehumidifier which can be moved
from room to room. Follow the installation instructions on commissioning:
-
Remove the packaging and place the device so that it stays upright.
-
Check all parts for visible damage. Take the device in use if there are damages and contact
your dealer.
Place the device near a power outlet. Place the device on a flat, solid and stable surface.
-
Keep at least 50CM free space on all sides and observe the safety instructions.
-
Install the drain hose, and set the window in position well, avoid kinks or bends in the hose,
so that the warm air can be discharged to the outside by means of the enclosed fittings. See
picture below.
Turn both ends of the drain hose into the square fixing clip and the flat fixing clip.
-
Place the square fixing clip into openings at the back of the air conditioner.
-
Advertisement
