Makita DML812 Instruction Manual page 5

• Do not ex pose a battery pack or appliance to
fire or e cessive temperature.
or temperature above 130°C (265°F) may cause
ex plosion.
• Follow all charging instructions and do not
charge the battery pack or appliance outside
of the temperature range specified in the
instructions. C h arging improperl y or at temperatures
outside of the specified range may damage the
battery and increase the risk of fire.
ave servicing performed by a ualified repair
•
person using only identical replacement parts.
T h is w ill ensure th at th e saf ety of th e product is
maintained.
• Do not modify or attempt to repair the appliance
or the battery pack ex cept as indicated in the
instructions for use and care.
o not dispose of the battery ies in a fire. T h e
•
cell may ex p lode. Ch eck w ith local codes f or possib le
special disposal instructions.
• Do not open or mutilate the battery(ies). Released
electroly t e is corrosive and may cause damage to th e
ey e s or skin. It may b e tox i c if sw allow ed.
• Do not charge battery in rain, or in w et locations.
• Do not handle charger, including charger plug,
and charger terminals w ith w et hands.
• Do not charge the battery outdoors.
8. The light source contained in this luminaire shall
only be replaced by the manufacturer or his
service agent or a similar ualified person.
posure to fire
1. Before using battery cartridge, read all
2. Do not disassemble battery cartridge.
3. If operating time has become ex cessively
4. If electrolyte gets into your eyes, rinse them out
5. Do not short the battery cartridge:
6. Do not store the tool and battery cartridge in
7. Do not incinerate the battery cartridge even if it
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
10. The contained lithium ion batteries are subject to
11. W hen disposing the battery cartridge, remove
12. Use the batteries only w ith the products
13. If the tool is not used for a long period of time,
5 English
Important safety instructions for
battery cartridge
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product using
battery.
shorter, stop operating immediately. It may result
in a risk of overheating, possible burns and even
an ex plosion.
w ith clear w ater and seek medical attention right
aw ay. It may result in loss of your eyesight.
(1) Do not touch the terminals w ith any
conductive material.
(2) Avoid storing battery cartridge in a container
w ith other metal objects such as nails, coins,
etc.
(3) Do not ex pose battery cartridge to w ater or
rain.
A battery short can cause a large current
flo , overheating, possible burns and even a
breakdow n.
locations w here the temperature may reach or
ex ceed 50 °C (122 °F).
is severely damaged or is completely w orn out.
he battery cartridge can e plode in a fire.
the Dangerous Goods Legislation req uirements.
For commercial transports e.g. b y th ird parties,
f orw arding agents, special req uirement on packaging
and lab eling must b e ob served.
For preparation o f t h e item b eing s h ipped, consulting
an ex p ert f or h az a rdous material is req uired.
P lease also ob serve possib ly more detailed national
regulations.
T ape or mask of f open contacts and pack up th e
b attery in such a manner th at it cannot move around
in th e packaging.
it from the tool and dispose of it in a safe place.
Follow your local regulations relating to disposal
of battery.
specified by Makita. Installing th e b atteries to non-
compliant products may result in a fire, e cessive
h eat, ex p losion, or leak of electroly t e.
the battery must be removed from the tool.