Operating The Vsi Controller - Quantum VSI Basic Operation Instructions

Operating the VSI Controller

The VSI Controller is used to operate your power
chair and all of its components. See figures 2, 3,
and 4.
The VSI controller may consist of:
1. joystick
2. keypad
3. 3-pin off-board charger/programming socket
4. 3-pin onboard charger (OBC) connector
5. 9-pin controller connector
6. 6-pin actuator
equipment)
7. 2-pin battery connector
8. 4-pin motor/brake connectors (left and right)
9. 3-pin lighting
equipment)
10. lighting module
connector (for optional
connector (for optional
Figure 2. VSI Controller (9-pin)
Figure 3. VSI Controller (Battery and Motor/Brake
Connectors)
Figure 4. VSI Controller (Lighting Module)
9